The highly anticipated 2015 Dalian Summer Davos Annual Meeting is about to open on September 9. On the 4th, the Dalian Summer Davos designated vehicle handover ceremony was held in Donggang Musical Fountain Square. 177 sponsored vehicles were unveiled, including 137 pure electric vehicles, accounting for 77.4%. This annual meeting is the largest number of electric vehicles used in previous Davos annual meetings.
A Trapezoidal Sheet Roll Forming Machine is a regular metal sheet roll former that produces metal roofing sheets or roof panels for both individual and industrial building.
Trapezoidal roofing sheets are the most popular metal roof panels not only for residential buildings but also for commercial or industrial buildings. There are so many different profiles for a variety of applications. People like to use low-profile trapezoidal sheets for elevation and IDT roofing, while for wide-span roofing and load-bearing structures, they tend to select high-profile trapezoidal sheets. In addition, trapezoidal sheets have other names in Africa as industrial trough IT4, IT5, IT6 roof profiles, therefore people can barely find two exactly the same trapezoidal sheet Roll Forming Machine in the markets.
This trapezoidal sheet roll forming machine produces trapezoidal sheets from colour ppgi, gi, aluzinc sheets, and sometimes aluminium steel coils (aluminum roof panels are prefered in Nigeria). Generally, material thickness varies from 0.3 to 0.8mm, and width varies from 914mm to 1250mm. However, in some applications, material thickness can reach up to 1.5mm, like roof deck. Furthermore, in some countries or areas, people use G550 material to make full hard metal roofing sheets.
Sometimes when a client needs to produce trapezoidal sheets with different effective widths with anything else remained the same. In this case, the investment shall be made on only one machine, because a trapezoidal Roof Panel Roll Forming Machine is always adjustable for different feeding widths. This means you can make trapezoidal roof panels with different effective widths from different-width materials. However, a client must need two trapezoidal sheet roll forming machines for manufacturing two panels at the same time.
Just like the regular roof sheet roll former, a trapezoidal sheet roll forming machine typically consists the components as following:
There are different names for trapezoidal sheet roll forming machines in some regions or areas! For example, in Africa, people like to metra roll forming machine, and sometime they give the name industrial trough IT4, IT5, IT6 roof sheet roll forming machineetc.
MAXON designs and builds customized trapezoidal sheet roll forming machines. For instance, some customers ask for G550 metal roofing sheet roll forming machine, some customers may prefer a separate forming stands structure trapezoidal sheet roll forming machine, or some customers may need safety guard on the roll forming machine body etc.
Trapezoidal Sheet Roll Forming Machine Trapezoidal Sheet Roll Forming Machine,Trapezoidal Joint Type,Tile Making Machine,Metal Sheet Roll Forming Machine Botou Golden Integrity Roll Forming Machine Co.,Ltd , https://www.jcxsteelrollformer.com
These 177 cars include cars, commercial vehicles, buss, buses, and many sightseeing classic cars. These 177 vehicles accounted for 40% of the 2015 Dalian Summer Davos annual meeting car. During the meeting, these vehicles will be driven by Chinese and foreign guests according to the designated route.
177 new energy vehicles invested in Davos pure electric vehicles accounted for nearly eight to provide "green travel" services to Dalian Summer Davos annual meeting delegates, Dalian Summer Davos annual meeting preparatory committee began to collect "Dalian City Government" at the beginning of the year In the work of designated activities, the pure electric vehicle is used as the collection direction, and the Dalian real estate new energy vehicle is the main model. Chery Automobile Co., Ltd., Dongfeng Nissan Automobile Sales Co., Ltd., Dalian Huanghai Automobile Co., Ltd., BYD Auto Industry Co., Ltd., Shenyang Chaoxiong Electric Vehicle Co., Ltd., Dalian Anda New Energy Car Rental Co., Ltd., etc.
In order to facilitate the timely charging of electric vehicles in the main venue of Davos, the Preparatory Committee organized the electric power department to build 33 charging piles in the ground parking lot of the Donggang International Conference Center, including 14 fast charging piles and 19 high-speed charging piles. 23 cars and 10 CMB cars are charged at the same time. At the same time, 27 charging piles are planned to be built in the underground parking lot of Donggang International Conference Center, which can be used for simultaneous charging of 27 cars, which basically meets the charging requirements of conference electric vehicles. In addition, 30 large-scale hotel underground parking lots such as Shangri-La and the No. 1 parking lot in Gangwan Street are planned to build 30 charging piles for 30 cars to be charged at the same time. In order to meet the charging needs of large electric buses, the Municipal Transportation Bureau actively coordinated the bus group and BYD Auto Company to temporarily charge 20 shuttle buses by using the two bus station charging facilities under construction.
In November 2013, Dalian City was listed as the first batch of new energy vehicle promotion and application cities in the country, and proposed the goal of promoting the application of 5,000 new energy vehicles and supporting the construction of corresponding charging facilities by the end of 2015. Up to now, the city has promoted 2,386 new energy vehicles in the fields of public transportation, rental, leasing, and private. It is expected that this number will continue to increase in the third and fourth quarters.
According to the Dalian Economic and Information Committee, the promotion and application of new energy vehicles in the city has also promoted the development of vehicle enterprises. Dalian BYD has reached the design capacity of 1,000 pure electric buses per year; the production bases of FAW buses and Brilliance buses in Dalian New models developed by Dalian Huanghai have been off the assembly line, and new energy vehicles are available in the capacity planning of Chery and Dongfeng Nissan Dalian plants. As the country's first batch of new energy vehicle promotion and application cities, the city has promoted 2,386 new energy vehicles in the areas of public transportation, rental, leasing, and private. It is expected that this number will continue to increase in the third and fourth quarters of this year. The goal of 5,000 new energy vehicles and supporting the construction of corresponding charging facilities is expected to be realized.
The overall construction of Dalian Xinneng Automobile Charging Facilities has progressed rapidly. In the bus field, 10 charging stations have been built, totaling 367 charging piles. At present, 7 stations have been connected to operate. This year, the city plans to add four new charging stations, and is currently working on site selection. In addition, in order to meet the city's pure electric taxi charging demand, the city is building three new charging stations for taxis, a total of 120 charging piles, and it is expected to be connected to electricity before the end of September. In the field of social sharing, the power supply company plans to build 1,100 social shared charging piles in the city. At present, the site selection and design of the site have been completed, and the next step will be entered into the construction phase.
Brief introduction of Trapezoidal Roof Sheet Roll Forming Machine:
TR750 Trapezoidal Sheet Roll Forming Machine
Technical Parameters of Trapezoidal Sheet Roll Forming Machine:
· 177 new energy vehicles invested in nearly 80% of Davos pure electric vehicles