20W CREE Mini ATV LED Work Light Bar
Posted on

Model NO.: TH-ET0120C
Power Output: 20 Watts
LEDs: 2PCS*10W CREE
Lumen: 1440lm
Optional Beam: Spot/Flood
Optional Bracket: with Bottom-Mounting Brackets
Len Materia: Polycarboante Lens
Materia: Diecast Aluminum Housing, Alum Alloy Bracket
Waterproof Rate: IP68
Length Size: 5"/11.8cm
Trademark: Teehon
Transport Package: One Piece in One Box, Twenty Boxes in One Carton
Specification: Carton size: 50*32*29cm
Origin: Guangzhou China
HS Code: 8512201000
Model NO.: TH-ET0120C
Power Output: 20 Watts
LEDs: 2PCS*10W CREE
Lumen: 1440lm
Optional Beam: Spot/Flood
Optional Bracket: with Bottom-Mounting Brackets
Len Materia: Polycarboante Lens
Materia: Diecast Aluminum Housing, Alum Alloy Bracket
Waterproof Rate: IP68
Length Size: 5"/11.8cm
Trademark: Teehon
Transport Package: One Piece in One Box, Twenty Boxes in One Carton
Specification: Carton size: 50*32*29cm
Origin: Guangzhou China
HS Code: 8512201000
20W CREE Mini ATV LED Work Light Bar

Slim LED Working Light Bars Advantages:
1. DC 9~60V ultra-wide operating voltage, applies to various vehicles;
2. Concise & mature designed circuit board ensures high quality;
3. 0.2% extreme low defective rate,due to the adoption of Korean components;
4. Straight Single-Row designed
5. With bottom-mounting brackets



The Specification of Working LED Light Bar:
ITEM DESCRIPTION
Model Number TH-ET0120C
Power Output 20 Watts
Operating Voltage DC9~60V
LED Chip 2pcs*10W CREE
Lumens 1440lm
Color Temperature:  6000K
Waterproof rating IP68
Optional Beam Pattern  Spot/flood
Housing Material Diecast aluminum housing
Mounting Bracket alum alloy bracket
Optional Bracket With bottom-mounting brackets
Len Materia polycarboante lens
Housing item Straight Single-Row designed
Length Size 5"/11.8cm
Life Span Above 30,000 hours 
Wire Length 60cm
Warranty 12 months

LED Light Bar Truck Qualifications:

20W CREE Mini ATV LED Work Light Bar

Spot LED Work Light E Series Size:
 
Model Length Size Power LED Type LED Quantity Lumens Beam
TH-ET0120C 5"/11.8cm 20W 10W Cree 2pcs 1440lm Spot/Flood
TH-ET0140C 8"/20.8cm 40W 10W Cree 4pcs 2880lm Spot/Flood
TH-ET0160C 12"/29.8cm 60W 10W Cree 6pcs 4320lm Spot/Flood/Combo
TH-ET0180C 15"/38.8cm 80W 10W Cree 8pcs 6400lm Spot/Flood/Combo
TH-ET01100C 19"/47.8cm 100W 10W Cree 10pcs 7200lm Spot/Flood/Combo
TH-ET01120C 22"/56.8cm 120W 10W Cree 12pcs 9600lm Spot/Flood/Combo
TH-ET01140C 26"/65.8cm 140W 10W Cree 14pcs 10080lm SSpot/Flood/Combo
TH-ET01160C 29"/74.8cm 160W 10W Cree 16pcs 11520lm Spot/Flood/Combo
TH-ET01180C 33"/83.8cm 180W 10W Cree 18pcs 12960lm Spot/Flood/Combo
TH-ET01200C 37"/92.8cm 200W 10W Cree 20pcs 16000lm Spot/Flood/Combo
TH-ET01240C 44"/110.8cm 240W 10W Cree 24pcs 17280lm Spot/Flood/Combo
TH-ET01260C 47"/119.8cm 260W 10W Cree 26pcs 18720lm Spot/Flood/Combo

LED Work Light Bar for Trucks Detail Image:
20W CREE Mini ATV LED Work Light Bar
20W CREE Mini ATV LED Work Light Bar

LED Light Bar for 4X4 Offroad Application:
20W CREE Mini ATV LED Work Light Bar
Company and Factory:
Established in 2008,Teehon has been dedicated in the research, development and manufacturing of LED Light Bar 12V, LED Work Light and LED headlight. Our factory own 7 production lines : 1 LED packaging line, 2 SMT production lines and 4 LED light production lines. The cost is controlled accurately and the quality is guaranteed.
 20W CREE Mini ATV LED Work Light Bar

Production Facilities:
Name No. Name No.
(Fuji, Panasonic, Casio) SMT machines 4 pressure testers 3
hot air-reflow systems 2 UV-VIS-Near IR Spectro photo colorimeter    2
wire peeling machines 4 LCR Digital Electric Bridges 3
laser carving machines 2 Oscilloscopes 5
automatic wire peeling machines 2 integrating sphere 1
20W CREE Mini ATV LED Work Light Bar
Size and Package Slim LED Working Light Bars:
Name piece G.W Size
One piece 1pcs 0.9kgs 23*20*11CM
One carton 20pcs/ctn 18kgs 50*32*29CM
 
Shipping for Working LED Light Bar:
Sample order Shipping by express like DHL, FEDEX, TNT, EMS about 3-5days
Bulk order Shipping by sea about 7-15days
 
Why choose us:
1.Provide complete ODM&OEM solutions, which include LEDs producing, circuit board designing & producing, as well as housing designing  
2.Strong R&D capabilities: to develop a new product costs only 30 days, we release at least 2 new products each month.   
3.Powerful production strength: we can produce 15,000pcs LED Light Bar Truck & 90,000pcs Rohs Ce LED Work Lights each month.   
4.Extraordinary quality & cost control ability: we are the only auto LED light manufacturer who makes the light from beginning to end, the defective rate of product is lower to 0.2%.
 The LEDs will be lighten up for 6 times before delivery, and each light will be tested strictly under water according to IP68 waterproof standard.   
  A modern factory: owns a high-class LED encapsulation laboratory, and 5 high speed full automatic SMT machines, the whole factory is equipped with over 30   advanced producing & testing facilities  
  
FAQ:

Q: What's your Spot LED Work Light after-sales service and warranty?
A: We promise to bear the following responsibility when defective product is found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.
 
Q: Do you accept ODM&OEM LED Work Light Bar for Trucks orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we are able to customize housings in different styles, and LED bulbs in different brands, we also customize circuit board & packaging box as per your requirements.
 
Q: How to work with you on ODM&OEM LED Light Bar for 4X4 Offroad orders?
A: There are three forms of cooperation for choice:
1.Housing customization: we need to negotiate the cost of development and reach an agreement before starting the cooperation;
2.Various colors of housing customization: No extra cost, however the MOQ is 100 pcs;
3.Various colors of LED bulbs customization: MOQ is 10 pcs, meanwhile the price will be increased.
    
Q: What's the LED Light Bar 12V MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.
 
Q: How long is Slim LED Working Light Bars lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.
 
Q: How to place Working LED Light Bar orders?
A: 1. Email us the model, beam pattern and quantity, consignee information, shipping way
and payment terms;
2. Proforma Invoice made and sent to you;
3. Complete Payment after confirming the PI;
4. Confirm Payment and arrange production.
  20W CREE Mini ATV LED Work Light Bar

Slim LED Working Light Bars Advantages:
1. DC 9~60V ultra-wide operating voltage, applies to various vehicles;
2. Concise & mature designed circuit board ensures high quality;
3. 0.2% extreme low defective rate,due to the adoption of Korean components;
4. Straight Single-Row designed
5. With bottom-mounting brackets



The Specification of Working LED Light Bar:
ITEM DESCRIPTION
Model Number TH-ET0120C
Power Output 20 Watts
Operating Voltage DC9~60V
LED Chip 2pcs*10W CREE
Lumens 1440lm
Color Temperature:  6000K
Waterproof rating IP68
Optional Beam Pattern  Spot/flood
Housing Material Diecast aluminum housing
Mounting Bracket alum alloy bracket
Optional Bracket With bottom-mounting brackets
Len Materia polycarboante lens
Housing item Straight Single-Row designed
Length Size 5"/11.8cm
Life Span Above 30,000 hours 
Wire Length 60cm
Warranty 12 months

LED Light Bar Truck Qualifications:

20W CREE Mini ATV LED Work Light Bar

Spot LED Work Light E Series Size:
 
Model Length Size Power LED Type LED Quantity Lumens Beam
TH-ET0120C 5"/11.8cm 20W 10W Cree 2pcs 1440lm Spot/Flood
TH-ET0140C 8"/20.8cm 40W 10W Cree 4pcs 2880lm Spot/Flood
TH-ET0160C 12"/29.8cm 60W 10W Cree 6pcs 4320lm Spot/Flood/Combo
TH-ET0180C 15"/38.8cm 80W 10W Cree 8pcs 6400lm Spot/Flood/Combo
TH-ET01100C 19"/47.8cm 100W 10W Cree 10pcs 7200lm Spot/Flood/Combo
TH-ET01120C 22"/56.8cm 120W 10W Cree 12pcs 9600lm Spot/Flood/Combo
TH-ET01140C 26"/65.8cm 140W 10W Cree 14pcs 10080lm SSpot/Flood/Combo
TH-ET01160C 29"/74.8cm 160W 10W Cree 16pcs 11520lm Spot/Flood/Combo
TH-ET01180C 33"/83.8cm 180W 10W Cree 18pcs 12960lm Spot/Flood/Combo
TH-ET01200C 37"/92.8cm 200W 10W Cree 20pcs 16000lm Spot/Flood/Combo
TH-ET01240C 44"/110.8cm 240W 10W Cree 24pcs 17280lm Spot/Flood/Combo
TH-ET01260C 47"/119.8cm 260W 10W Cree 26pcs 18720lm Spot/Flood/Combo

LED Work Light Bar for Trucks Detail Image:
20W CREE Mini ATV LED Work Light Bar
20W CREE Mini ATV LED Work Light Bar

LED Light Bar for 4X4 Offroad Application:
20W CREE Mini ATV LED Work Light Bar
Company and Factory:
Established in 2008,Teehon has been dedicated in the research, development and manufacturing of LED Light Bar 12V, LED Work Light and LED headlight. Our factory own 7 production lines : 1 LED packaging line, 2 SMT production lines and 4 LED light production lines. The cost is controlled accurately and the quality is guaranteed.
 20W CREE Mini ATV LED Work Light Bar

Production Facilities:
Name No. Name No.
(Fuji, Panasonic, Casio) SMT machines 4 pressure testers 3
hot air-reflow systems 2 UV-VIS-Near IR Spectro photo colorimeter    2
wire peeling machines 4 LCR Digital Electric Bridges 3
laser carving machines 2 Oscilloscopes 5
automatic wire peeling machines 2 integrating sphere 1
20W CREE Mini ATV LED Work Light Bar
Size and Package Slim LED Working Light Bars:
Name piece G.W Size
One piece 1pcs 0.9kgs 23*20*11CM
One carton 20pcs/ctn 18kgs 50*32*29CM
 
Shipping for Working LED Light Bar:
Sample order Shipping by express like DHL, FEDEX, TNT, EMS about 3-5days
Bulk order Shipping by sea about 7-15days
 
Why choose us:
1.Provide complete ODM&OEM solutions, which include LEDs producing, circuit board designing & producing, as well as housing designing  
2.Strong R&D capabilities: to develop a new product costs only 30 days, we release at least 2 new products each month.   
3.Powerful production strength: we can produce 15,000pcs LED Light Bar Truck & 90,000pcs Rohs Ce LED Work Lights each month.   
4.Extraordinary quality & cost control ability: we are the only auto LED light manufacturer who makes the light from beginning to end, the defective rate of product is lower to 0.2%.
 The LEDs will be lighten up for 6 times before delivery, and each light will be tested strictly under water according to IP68 waterproof standard.   
  A modern factory: owns a high-class LED encapsulation laboratory, and 5 high speed full automatic SMT machines, the whole factory is equipped with over 30   advanced producing & testing facilities  
  
FAQ:

Q: What's your Spot LED Work Light after-sales service and warranty?
A: We promise to bear the following responsibility when defective product is found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.
 
Q: Do you accept ODM&OEM LED Work Light Bar for Trucks orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we are able to customize housings in different styles, and LED bulbs in different brands, we also customize circuit board & packaging box as per your requirements.
 
Q: How to work with you on ODM&OEM LED Light Bar for 4X4 Offroad orders?
A: There are three forms of cooperation for choice:
1.Housing customization: we need to negotiate the cost of development and reach an agreement before starting the cooperation;
2.Various colors of housing customization: No extra cost, however the MOQ is 100 pcs;
3.Various colors of LED bulbs customization: MOQ is 10 pcs, meanwhile the price will be increased.
    
Q: What's the LED Light Bar 12V MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.
 
Q: How long is Slim LED Working Light Bars lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.
 
Q: How to place Working LED Light Bar orders?
A: 1. Email us the model, beam pattern and quantity, consignee information, shipping way
and payment terms;
2. Proforma Invoice made and sent to you;
3. Complete Payment after confirming the PI;
4. Confirm Payment and arrange production.
 

Chicken Cut-Up Machine/Chicken Dressing Machine:

CONNECT CUT-UP line including two model which semi-automatic cutting up on overhead conveyor line and with automatic cut-up equipment. There are many kinds of cut-up production, mainly is wing, whole leg, drum stick, chest, feet , and offal

The sequence of broiler cut-up order is leg,chest, by-products, leg bone removal and chest bone removal

The cut-up production line design:

1. The each cut-up line capacity is around 3000 to 4000BPH is better

2. The conveyor line speed is not more than 10m/min

3. For the manual cut-up, the conveyor line height from floor to bottom of shackle is 1450mm,

4. The cut-up products trimming

Generally: 25-30 pcs/worker/Min

Leg de-boning : 10-15 pcs/worker/Min.

5. The design of cut-up room should keep enough space for workers passing way, if needs carts, the space should be big enough

6. The cut-up operation table material should follow food safety requirement stainless steel or other food standard material.

7. The cut-up room should together with packing material storage room

8. There are tools washing and inspection area in the cut-up room

9. The floor and wall have to be easy cleaning

10. The temperature of cut-up room should around 10-15℃

Chicken Cut-Up Machine

Chicken Cut-Up Machine,Chicken Portioning Machine,Poultry Portioning Equipment, Poultry Portioning Machine,Chicken Portioning Equipment,Chicken Dressing Machine

Connect Group For Poultry Project , http://www.connectpoultry.com