Feature : 

1. High pressure boiler feed pumps
2. Pumping high pressure clean water

Product Description: 

Feed Water Pump are used for feeding high pressure boiler or pumping high pressure clean water. The temperature of pumped 
media is not more than 210C.

Application:

Fire water supply, high-rise water supply, industrial water supply, mine water supply and drainage.

Performance and features:

High lift, low energy consumption, reliable performance.The parts are interchangeable and easy to use.The product specification
complete, the coverage is wide, convenient to buy.

Performance Range :

• Range of capacity: 32 to 620 m3/h 
• Range of total head: 550 to 2150m

Structure Feature:

• Shaft sealing:The shafts of these pumps are sealed by soft-packing and cooling water mechanical seal can be used
• according to client's requirements.
• Bearings and axial balancing device:The rotating assembly is supported by sliding bearings on both ends of the pump.
• Bearings of pump are forcedlubricated. The oil system is equipped for type DG pump. The axial thrust of rotores is balanced
• by balance disc and the thrust      bearing is also provided which is used to bear residual axial force caused by the change of
• working conditions. 
• Drive: The pump is directly driven by the motor through the flexible coupling. The gear coupling, membrane coupling and hydraulic
• coupling can be used according to client's requirements. The pump can be driven by turbine or motor.The rotating direction of
• pumps are clockwise when viewed from the driving end.
• Material: Suction casing, discharge casing, diffuser, and impeller: carbon steel or chrome steel Shaft, wear ring, diffuser bush:
• chrome vanadium steel or chrome steel,  DG CHT CHTA CHTC water sump pump systems boiler feed water pump

Structure of Feed Water Pump:

Delivery Packing :

More Products picture:

Company Picture:


For more details , pls contact with us!

 

Feature : 

1. High pressure boiler feed pumps
2. Pumping high pressure clean water

Product Description: 

Feed Water Pump are used for feeding high pressure boiler or pumping high pressure clean water. The temperature of pumped 
media is not more than 210C.

Application:

Fire water supply, high-rise water supply, industrial water supply, mine water supply and drainage.

Performance and features:

High lift, low energy consumption, reliable performance.The parts are interchangeable and easy to use.The product specification
complete, the coverage is wide, convenient to buy.

Performance Range :

• Range of capacity: 32 to 620 m3/h 
• Range of total head: 550 to 2150m

Structure Feature:

• Shaft sealing:The shafts of these pumps are sealed by soft-packing and cooling water mechanical seal can be used
• according to client's requirements.
• Bearings and axial balancing device:The rotating assembly is supported by sliding bearings on both ends of the pump.
• Bearings of pump are forcedlubricated. The oil system is equipped for type DG pump. The axial thrust of rotores is balanced
• by balance disc and the thrust      bearing is also provided which is used to bear residual axial force caused by the change of
• working conditions. 
• Drive: The pump is directly driven by the motor through the flexible coupling. The gear coupling, membrane coupling and hydraulic
• coupling can be used according to client's requirements. The pump can be driven by turbine or motor.The rotating direction of
• pumps are clockwise when viewed from the driving end.
• Material: Suction casing, discharge casing, diffuser, and impeller: carbon steel or chrome steel Shaft, wear ring, diffuser bush:
• chrome vanadium steel or chrome steel,  DG CHT CHTA CHTC water sump pump systems boiler feed water pump

Structure of Feed Water Pump:

Delivery Packing :

More Products picture:

Company Picture:


For more details , pls contact with us!