Double Color Plastic Volumetric Doser
Posted on

  • Model NO.: CM
  • Working: Convection Mixer
  • Application: Granules
  • Application Area: Plastic Industrial
  • Mixing Drum Shape: No
  • Operating type: Continuous Operating
  • Trademark: SHICA
  • Specification: 25kg
  • Mixer Type: Volumetric
  • Stirring Type: Forced
  • Certification: CE
  • Layout Type: Horizontal
  • Additional Capabilities: Volumetric
  • Condition: New
  • Transport Package: Wooden Package
  • Origin: China
1)CM series volumetric dosers are suitable for auto-proportional mixing of virgin materials, regrinds, masterbatch or additives. A gear motor with gear ratio of 38 : 1 or 75:1 is coupled to a dosing screw of 12, 14 or 16mm diameter to give a total of six models with output. ranging from 0.1~32kg/hr. Double color dosers can be assembled from two single color dosers if required. Five components automatic mixing can be realized if customers adopt four color dosers.
2)The current operation mode can be recorded, unaffected by power failure so operation would be returned to normal when power is on.
3)Main material hopper is a standard equipment for double color doser. It is optional for single color doser.
4)Both master blockage and overload can be detected, then machine will halt and sound alarm.
5)Applicable on extrusion machines, just need to make a few wire replacements.
MODEL SINGLE COLOR 
ITEM CM-12 CM-14 CM-16 CM-30 CM-50
SCREW EXTERNAL DIA(MM) 12 14 16 30 50
OUTPUT CAPACITY(KGS/H) 0.1-20 0.2-40 0.5-64 0.8-115 50-200
STORATE HOPPER(L) 15 70
POWER(KW) 0.12KW,1Φ230/50HZ 60HZ
WEIGHT(KGS) 23 24 25 28 30

Valve Cover Gasket made of rubber or cork, its function is seals the top of the engine and prevents the oil leaks.
The color of Valve Cover Gasket usually is: Black, Gray, Blue, and Red- 

The rubber material of Valve Cover Gasket can be NBR(Nitrile Butadiene Rubber), ACM( ACrylate Material), SILICON AND VITON. Each type material have their own character: Consider the following characters when you choose the valve cover gasket: Vehicle types, oil-resistance, temperature-resistance, aging properties, costing and personal preference etc-

HAP VALVE COVER GASKET BASIC characteristic: 
Easy install.
Withstand high and low temperatures.
Provide the reliable sealing.
Use minimal tightening.

The new trend of valve cover gasket: 
These years, the new valve cover gasket are increasingly produced with profiles and not flat; that is, gasket surface is produced with beads or lips, Instead of the whole gasket surface, only the profile need to be pressed, So, the sealing beads or lips is very important, just a slight amount of bolting force can produces the sufficient deformation and adaptation. 


Valve Cover Gasket

Valve Cover Gasket,Durable Valve Cover Gasket,Rubber Valve Cover Gasket,Wear Resistant Valve Cover Gasket

HAFID INTERNATIONAL LIMITED , https://www.hapgasket.com