When removing the wheel, accidentally picking up butter or gear oil on the brake drum is a problem for many drivers. How to remove the oil from the brake drum simply and effectively? Today Hugo came to teach you a very reliable method.

The most common brake drum is gear oil

Gear oil can be said to be the most common lubricating oil for brake drums. Compared to the trailer and the front wheel of the main vehicle, the internal gear oil is most likely to flow into the brake drum when the drive wheel with the semi-shaft drive is disassembled. Maintenance-free design of vehicles.

Brake drum internal gear oil

We all know that the high temperature resistance is the characteristic of butter and gear oil. In the continuous running, small heat dissipation area inside the bearing can also continue to maintain lubrication, reduce friction, then in the brake drum with a large heat dissipation area, even if the brake shoe Friction, its temperature will not be too high. Therefore, many maintenance workers say that "there's nothing to do with oil, and there is no brake pedal," which naturally won't be established. After all, cleaning the oil inside the bright and clean brake drum is a time-consuming and labor-intensive task.

Brake drums washed with rags and degreasers

Oil can still be seen after cleaning

Although the degreaser has the effect of degreasing, it does not work well on a smooth-surfaced brake drum. If you want to clean it thoroughly, no two or three bottles will come. The traditional method of burning with fire is not inferior to the degreaser in terms of timeliness and complexity.

A soil can absorb the oil on most brake drums

The method Hugo introduced to us is more practical, as long as it doesn't rain, you can find raw materials at any time, and completely free of charge, right, is a humble soil, grabbed, sprinkled in the brake drum, with With one click, you can absorb most of the oil stains.

Apply the dirt evenly inside the brake drum

If there are too many oils, add proper soil. After cleaning, you only need to pour the soil out of the brake drum. Finally, wipe the surface of the floating soil with paper. At this time, rubbing the inside of the brake drum with fingers again, the resistance will obviously increase, and the oil film dispersed on the surface no longer exists.

No obvious grease

● Postscript:

In order to make our car brakes more efficient, we can use the method described by Hugo to deal with the oil on the brake drum during the next round of disassembling the car. Don't listen to the so-called "stepping on the feet and not having it." Trouble saying. The removal of more heat-resistant butter does not mean that even if you want to completely "volatilize" the gear oil by temperature, it is not achievable in a short time. After all, lubricating the brake pads is a very unwise choice.

Auto Parts Used For Toyota Hiace

Rear Door,Toyota Hiace Middle Door Pillar,Hiace Rear Bumper Part,Toyota Hiace Rear Bumper

Baoying Shuguang Auto parts Factory , https://www.shuguangautoparts.com