The "7.19" incident that took place this month has caused everyone to feel sad. All the people in the car have died. This is a terrible thing. After traveling on the Internet, they must also stay away from the long-distance tourist bus. Many people doubt: Why didn't anyone open the door to save themselves? It turned out that the accident vehicle safety door was installed with a "dark lock", and the door could not be opened from inside or outside. Therefore, especially in the summer, parents who want to go out to travel must also choose safe and reliable long-distance tour buses. This gives them a guarantee! But the main thing is that the bus company must do all its own safety work, just in case! Therefore, we must strictly do the following: Fire extinguisher Each car must-have items - fire extinguisher (commonly used portable dry powder fire extinguisher), maintenance personnel should be clear that the fire extinguisher safety cycle is 12 months, beyond the deadline must be maintained. Fire extinguisher annual inspection, fire extinguisher maintenance can not be free to operate their own, must have qualified maintenance of repair units must be repaired, replacement of damaged parts, cylinder pressure test, refilling fire extinguishing agent and drive gas! , 2. Safety hammer The hammer is also called the "life-saving hammer." There are relevant regulations that all company vehicles must hang the safety hammer on the upper side of the window on the back side. Because when the vehicle accident occurs, the inside of the vehicle is in a closed state. Under strong impact, the door cannot be distorted. Use a safety hammer to break the window glass to help passengers escape. Just like this "7.19" accident, if you know how to use a hammer, then you don't really have such an astonishing thing about the death of the entire vehicle. 3. Guarantee the effective performance of the vehicle Long-distance tour buses need a lot of inspections. It is imperative that vehicles are not allowed to travel without a procedure. It is imperative to do annual inspections of vehicles, two-dimensional inspections, maintenance inspections, and updates of old ones, and do a good job in the three inspections of the vehicle's performance (before, during, after, and after) so as to ensure the integrity of the tourist bus. The hard rules must be promptly verified to ensure that they are within the scope of validity. 4. Maintain good driving habits Although a good long-distance tour bus is important, the driver in the car is the most important factor for safe driving. Therefore, the driver must maintain a fine and subtle habit, which is extremely helpful for safe driving. Attention should be paid to the following points: Super-speeding and non-fatigue driving are forbidden. It is forbidden to violate the rules at high speed from 2:00 to 5:00 in the morning to enhance the conscientiousness and rigorousness of safe driving and sound the alarm for safe driving. In addition, the driver must have a strong sense of responsibility. In the event of an accident, he must do his best to help evacuate the crowd and ensure that the impact of the accident is minimized! Do not escape first! Every year there are too many painful lessons. They also warn us that we must be careful when driving, we must strictly prohibit the use of "sick" vehicles, ensure that the vehicles are in good condition and that they are qualified for inspection, and strictly implement regular maintenance of vehicles.
Stainless steel
thick-film heating tubes of GIDAPE®ANDETONG® series
manufactured by JIEDA company are tubular structures, which allows rapid water
flow and instant heat carrying. Under the same conditions, GIDAPE® ANDETONG® series has many application advantages, such as large heating area, high
heat conduction efficiency (≥98%), rapid thermal response (≥80 ℃~150℃/S), long working life (≥10000 hours), etc.
JIEDA larger than 3300w thick
film Heating Element consists of stainless steel thick-film heating pipe, outer
protective shell, water inlet and outlet joints, anti-dry thermostat,
power cord, etc. It can be fixed on sides, with G1/2 thread diameter connecting
orifice.
This type of
heating body is an intelligent temperature control thick film heating body. It
can work with the PCB circuit control system, so that the pre-set temperature
and hot water quantity can be decided.
At present, thick
film Heating Tube(heating body) of GIDAPE®ANDETONG® series
has been successfully applied to fluid heating field, such as: pipeline machine, kitchen under sink water heater,industrial equipment and so on.
Larger Than 3300W Heating Element Larger Than 3300W Heating Element,Water Heating Element,Thick Film Heating Element,Dishwasher Heating Elements XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD , https://www.tubularheater.de
What are the safety warnings for long-distance tourist buses traveling in summer?