Cold Truck Startup When the engine is cold, require the driver to move the vehicle for at least 30 seconds after the engine starts to run at idle speed, and try to avoid the stuck pump failure caused by too high speed of the turbine pump when the engine oil is cold after the cold start. Turbocharger lubrication is generated by the engine oil pump pressure generated through a special tubing to achieve, if you are anxious to move the vehicle after cold start, turbo pump speed, load quickly increased, while the oil pressure is low, it A turbo pump stuck stuck.
The Hoist Chain is
useful tool in lifting heavy goods. Its length can be adjusted according to
different lifting height requirements. What we provides to customers is the
Galvanized Hoist Chain manufactured using French automation equipment.
Advantages
One single
Chain is able to lift up to 2.5 tons of goods. This figure is 1.5tons higher
than that of other brand chains.
High
precision grinding and heat treating
Stable
operation during lifting
Designed
for high lifting heights
Technical Features
Material:
high-quality 80 steel alloy
Corrosion-resistant
galvanized coating
Surface treatment:
polish, black finish, dip coating, electroplating, etc.
Conform to
ISO3077,EN818, and AS2321 standards
Strength:
Grade 80
Proof test
load: twice or 5 times the working load limit
Minimum
breaking strength: four times the working load limit.
Applications
Transformer,
storage and logistics, machining, nuclear power, wind power, automobile, waste
management, papermaking, steel, material handling, metallurgy, and
petrochemical industries.
Chain Crane Hoist Chain,Hoist Chain,Galvanized Hoist Chain,Corrosion-Resistant Chain Eurocrane (China) Co., Ltd. , https://www.eurocranegroup.com
Stopping the vehicle After the vehicle runs high speed, the engine should not be turned off immediately, because the turbocharger pump still rotates at a high speed under the effect of inertia. At this time, the lubrication of the turbine shaft is completed by the work of the engine oil pump. At this time Engine stalling will stop all lubrication immediately, and high-speed rotation of the turbine shaft will be stuck due to lack of lubrication failure, so the correct method of operation is finished running at high speed, the first idling after a while for about 90 seconds, and then Turn the engine off again.
1.8T turbocharger pump practical application tips