Slitting Line, Cut To Length Manufacturers
both two types machines are for cutting the coil to small pieces then the coil
could be used together with various types machine. For slitting machine, it is
used for slitting the wide coil to narrow pieces then it could be used for
making pipe, purline and others. For the cutting to length machine, it is used
for cutting the long coil to small length pieces, then it could be used
together with manual version roofing sheet roll forming machines and Liner Forming Machine.
Slitting Line/Cut To Length Line Slitting Line Machine,Coil Slitting Line,Steel Slitting Line,Cut To Length Line,Liner Forming Machine Zhongtuo Roll Forming Machinery Co., ltd , https://www.rollsformingmachines.com
Contact Person: Andy Chou Â
1) machines configuration
a) control: Techmation  ------------------------ Taiwan
b) servo motor:  Phase  ----------------------------Italy
c) Servo driver: Inovance---------------------------China
d) Pump: Sunny --------------------USA
e) Electron Components: Schneider--------------France
f) Position Transducer :Â Novotechnik----------------Germany
2) machines delivery times.
HRL158: We have stock, just as follows, the delivery time is 10 days.
3) payment item:
    30% down payment as T/T. rest 70% will paid by T/T before shipment.
Part two Machines warranty
1) all the machines will be given service for whole life.
2) all the machines warranty is 1Â years. Except the easy broken parts. But all the casting parts with tie-bar will be 2Â years
3) Screw warranty :Â if use 100% new material. will be one years. if 100% recyle material. Will be 6Â month.
4) technology support for machines whole life.
Part three  machines setup and training customer's engineer
In usual our engineer can come to customer's factory setup and training engineer within 10days. engineer salary and visa payment paid by our side.  the air ticket (go and back) and your local hotel and safe also food paid by your side.
Part four Parameter of the HRL158
Screw Diameter: A: 38mm B: 42mm C: 45mm
Screw L/D Ratio: A: 23Â Â B: 20.8Â Â C: 19.4
Shot Volume (Theoretical): A: 260CM3Â Â B: 318CM3Â Â C: 365CM3
Injection Weight (PS): A: 230g B: 281g C: 322g
Injection Pressure: A: 223MPa B: 182MPa C: 159MPa
Max. Injetion Rate: A: 112CM3/S B: 137CM3/S C: 157CM3/S
Max. Plasticizing Capacity: A: 13.5g/s B: 16g/s C: 21.5g/s
Max. Screw Rotation: 208RPM
Injection Stroke: 230mm
Clamping Force: 1580KN
Toggle Stroke: 380mm
Min. Mold Height: 160mm
Max. Mold Height: 470mm
Space Between Tie Bars: 450*420mm
Ejector Tonnage: 53KN
Ejector Stroke: 120mm
Heating Power: 8KW
Heating Section: 3+1
Motor Power: 13KW
Oil Tank Capacity: 270L
Machine Dimension: 4.5*1.4*1.9m
Max. Pump Pressure: 16MPa
Machine Weight: 4Ton
Please take more reference for our machine for the following photos,
Â
158ton 160ton Servo Motor Techmation Plastic Injection Molding Machine
Model NO.: HRL158
Computerized: Computerized
Certification: CE
Trademark: Harun
Transport Package: Container Delivery
Origin: Ningbo, China
158Ton 160Ton Servo Motor Techmation Plastic Injection Molding Machine