eep groove ball bearings or single row radial ball bearings, are the most common type of rolling bearings. Their use is very widespread. It usually consist of a pair of rings, a retainer, a single row of steel balls. The two races are grooved or shaped on their inner surfaces to accept and retain the balls, Single Row Deep Groove Ball Bearings have the highest speed capacity of all rolling element bearings, Deep Groove Ball Bearing is mainly used to bear radial load and operating at relatively high speeds, but it can also bear a certain amount of axial load in either direction.
Feature:
Compared with other bearings, deep groove Ball Bearing has smaller friction coefficient and higher limiting rotate speed, it is more durable and universal with low noise and is easier to install. Deep groove ball bearings tend to have lower load capacity for their size than other kinds of rolling-element bearings due to the smaller contact area between the balls and races.
Since sliding cannot be eliminated in the contacts between the cage and other bearing parts, the cage itself is the first component to be affected when lubrication becomes inadequate. Our ball bearings use unique design polyamide and steel cage, The inner/outer rings and Retainer(cage) are thicker compare with the Common bearings, stronger rivet, which consist more reliable structure. strong impact and heavy load with Grinding groove and super finishing technology. to offer the long life under extreme harsh environment.
Clearance:
Deep groove ball bearings have internal clearance. This provides the bearing room for expansion between the bearing races and will add a small amount of play between the two rings. Large clearance C3/C4 usually used in harsh environment. with good anti-seize performance used in particularly harsh environment.
Tolerances
The standard version of our single-row deep groove ball bearings has the tolerance class P0
(designs with tighter tolerances available upon request)
Types:
1. Classified according to sealed type:
Open type: Open type deep groove bearings are manufactured without seals to allow for the free circulation of either oil or grease, cost effective solution
Shielded type: With one shield (-Z) on one side or two shields (-2Z/ZZ) on both sides; Shielded bearings are provided with non-contacting metal shields that protect against larger particles entering the bearing, but do not protect against liquids. They add no friction during operation and therefore do not generate heat build-up.
Sealed type: With one seal (-RS) on one side or two seals (-2RS) on both sides. Sealed bearings are supplied with a contacting lip seal that excels in protecting the bearing from liquids and other foreign contaminants. The inherent design creates friction, drag, and in turn heat; factors that require consideration in high speed applications.
2. Classified according to the Retainer/Cage:
Nylon cage deep groove ball bearing: Our KA(Nylon retainer) series bearings Obtained MA certification of China Coal Research Institute, safety certificate of approval for mining products (rollers) in China, with good performance of anti-seize and anti-static.
Steel cage deep groove ball bearing: Thicker cage with stronger rivet, which consist more reliable structure.
Main Products Models And Specifications:
Series 60.., 62.., 63.., Open/ ZZ/2RS..
6200 Series - Light Series Ball Bearings – Balanced between space and load capacity
6300 Series - Medium Series Ball Bearings – Ideal for heavier load capacity applications
To be the first class, to do the best quality, to make users satisfied, to ensure customers relieved, are our enterprise purposes. Welcome bearing dealers` and Conveyor Idler manufacturers contact from all over the world, and become our partner.
Deep Groove Ball Bearing Ball Bearing,Sealed Ball Bearing,Deep Groove Ball Bearing,Radial Ball Bearing Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl
2.Application of Cargo Transport Equipment
Uses of heavy cargo transport equipment:
For horizontal load transfers of a wide range of material, we have the heavy duty, high quality Transfer Cart solution you need. Transfer equipments are used: to carry loads along assembly lines; transfer material from one work station to the next; store and transport an entire shift worth of production. They can even be used as a stable yet moveable machine base. With four different styles and standard capacities up to 60 tons, we have the solution you need and each style can be designed for your specific application.
3.Applicable Sites of Cargo Transport Equipment
PERFECT conceives and manufactures a wide range of railway guided transfer carts, battery powered trolleys, intelligent self-propelled trolleys, die carts, industrial flat trailers, tilters and lifting platforms that operate in many industrial fields: metallurgy, manufacture, oil and gas, die shops, shipyards, chemical plant, automotive, mining industry, aerospace, power generation, coal industry, paper mills, metalworking, warehouse and many others!
4. Parameter of Cargo Transport Equipment
BJT SERIES TRANSFER CART TECHNICAL PARAMETER TABLE
Model
KPJ-2t
KPJ-5t
KPJ-10t
KPJ-16t
KPJ-20t
KPJ-25t
KPJ-30t
KPJ-40t
KPJ-50t
KPJ-63t
KPJ-80t
KPJ-100t
KPJ-150t
Rated Load(t)
2
5
10
16
20
25
30
40
50
63
80
100
150
Table Size(mm)
Length( L)
2000
3500
3600
4000
4000
4500
4500
5000
5500
5600
6000
6500
10000
Width( W)
1500
2000
2000
2000
2200
2200
2200
2500
2500
2500
2600
2800
3000
Heigth( H)
500
550
550
600
600
650
650
700
700
800
900
1000
1200
Wheel Base(mm)
1200
2500
2600
2800
2800
3200
3200
3800
4200
4300
4700
4900
7000
Rail Inner Gauge(mm)
1200
1435
1435
1435
1435
1435
1435
1435
1435
1435
1800
2000
2000
Wheel Diameter(mm)
Ф270
Ф300
Ф300
Ф350
Ф350
Ф400
Ф400
Ф500
Ф500
Ф600
Ф600
Ф600
Ф600
Wheel Quantity
4
4
4
4
4
4
4
4
4
4
4
4
8
Ground Clearance(mm)
50
50
50
50
50
50
50
50
50
75
75
75
75
Running Speed(m/min)
25
25
25
20
20
20
20
20
20
20
20
20
18
Motor Power(Kw)
0.8
1.5
1.5
2.2
2.5
3
4
5.5
5.5
7.5
7.5
11
15
Running distance(m)
25
25
25
25
30
30
50
50
50
50
50
50
50
Max Wheel Load(KN)
14.4
25.8
42.6
64.5
77.7
94.5
110.4
142.8
174
221.4
278.4
343.8
265.2
Reference Weight(t)
2.5
3.5
4
5.2
5.6
6.2
6.5
7.3
7.8
10.5
12.3
14.1
26.2
Recommended Rail Model
P15
P18
P18
P24
P24
P38
P38
P43
P43
P50
P50
QU100
QU100
Notes:1.Load capacity,table size and rail gauge can be customized. 2.Options:a.Cable reel( Spring type, magnetic coupling type,motor- driven type);b. Automatic stop when detecting obstacle or person, limit switches(to limit travel);c.Operation way(hand held control pendant,remote radio control or operation platform with the cart; d.Electrical parts(imported or made in China); e. power supply position( middle or two ends);f.Variable speed device(VFD); g.Can be designed to meet special working environment such as high temperature.
Low noise It causes low noise level.
Maximum safety Offers guarantee of maximum safety for operators and for the material handled. We really care about the safety of everyone involved in the job.
Easy for operation These vehicles are easy to drive, so as soon as you get it you will be able to use it to transport your loads. We will support you to make the best out of your heavy load transporter.
Suitable for All Kinds of Weight The steering battery powered trolley is superb for handling both small and extremely huge loads for its modular fabrication and its high payloads: up to 300 ton for each trolley.
6. Customizable of Cargo Transport Equipment
Appearance:Table Size, Table Material, Table type, Rated Load, Color, Wheel Base,Detachable structure etc.
Special Function:Â Hydraulic Lift Table, Dumpling, Climbing, V shape, PLC control system, Automatic Positioning, clamping device, Anti-explosion, Heat-proof function, Weighting system etc.
Safety Device: Alarm light, Emergency stop button, Radar detector, Buffer, V shape support, Guardrails etc.
Special Design: Round corner, Hold pendant box, Lifting hole etc.
7. Factory and Customers
8. Q&A
Will A Transfer Cart Be A Good Solution?
A good question to ask since there are many material handling solutions on the market! Which one is the right choice? For starters, transfer carts are moveable platforms used for the horizontal movement of materials, assemblies, and other items. Consideration must be given to the weight of the load and the travel requirements for the application.
What Are The Advantages of Using a Transfer Cart?
For smaller loads, manual carts can be dedicated to specific work place activities such as shuttling materials. This often makes the carts more available for use. Transfer carts are more accommodating for moving long loads through restrictive passage ways or doorways. For heavier loads transfer carts are an excellent affordable choice for their ability to handle heavy loads. Transfer carts are compact in design and work well in areas with limited floor area. Another advantage over lift trucks is how the cart deck can be customized to suit specific loads.
What Product Handling Applications Use Transfer Carts?
1.  Coils (V-Groove deck)
2.  Tanks (size/stability for uniformly distributed loads)
3.  Assemblies (fixture cradle) for a complete build or to send a partially completed product to the next station (tractors, heavy equipment machinery)
4.  Sub-Assembly shuttle from one line to another line
5.  Maintenance cart for motors and pumps
6.  Equipment support (stand-off deck) for navigating loads to locations with a plant facility
7.  Material shuttle for steel tubing (flat decking with guard rails)
8.  Elevating platform for assembly process (integrated screw-jack table)
9.  Sand casting (flat decking)
Cable Driven Motorized Transfer Carriage Cargo Transport Equipment
Model NO.: BJT
Control Mode: Pendant/Remote/PLC Control
Power Mode: Battery, Cable, Conductive Rails
Color: Customzied
Material: Steel
Trademark: PERFECT
Transport Package: The Whole Cart Will Be Packed by Tarp.
Specification: 3600*2000*500
Origin: Xinxiang
HS Code: 84289090
Cable Driven Motorized Transfer Carriage Cargo Transport Equipment
1.Introduction of Cargo Transport Equipment
Henan Perfect Handling Equipment Co., Ltd.  is specializing in the design and manufacture of heavy material transport equipment to solve every material handling requirement. Our product includes Industrial Trailers, Transfer Cars, Electric Railway Transfer Trolley, Battery Operated Transport Trolley, Coil and pipes Carrier Equipment, Ladle Handling Equipment, Hydraulic Lift Table, Turntables and many other specialty items.Our line of cargo transport equipments are designed and manufactured to accommodate the needs of a wide range of industries including Steel, Aluminum, Automotive, Heavy Manufacturing and others. These material handling equipment are designed to operate on floor mounted rails and are used to transport heavy materials across crane bays or in areas not serviced by an overhead crane.Â