China Automatic Wire Nail Making Machine for Low-Medium-High Carbon Steel Wire
Posted on

Model NO.: Z94-6C
Model NO.: Z94-6C

China Automatic Wire Nail Making Machine For low-medium-high Carbon Steel Wire 

 

My contact way

My mobile: 86-15251635399

 

Echo Shi

 

 

Nail Making Machine  Details

Nail making machine is our hot-selling machine, they are very popular among our overseas customer.

Z94C series New Generation adopts plunger type to insure High speed ,low noise, Less Impact. 

It consists of lubricating systerm and driving systerm.

The driving systerm include wire feeding,wire clamping ,wire cutting and stamping.

 

Nail Making Machine Characteristics

1) Stable Quality and Good Continuity

2) Fully Automatically and Less Impact

3) High Speed and Low Noise

4) Main components are made of high quality steel, such as shaft, cams and gear.

5) It can make the high quality of asphalt felt nails and other special nails used for high speed coil nail welder and coil nailers.


Nail Making ProcessChina Automatic Wire Nail Making Machine for Low-Medium-High Carbon Steel Wire
 

First, Shucking Machine removes surface oxide and rust from raw steel wire.

Second, Pointing Rolling machine is to make the point of the raw wire thinner, then it can enter through the wire drawing dies to draw.

Third, wire drawing machine is used to draw the raw wire to the needed dia for nails. we also make all kinds of pulley wire drawing machine.
 

Item

           Continuous Multi-block Type

Model

LW- 1-6/ 560 

LW-1-7/450

LW-1-6/350

Tensile strength of wire rod

110kg/mm2

128/mm2

140/mm2

Max. dia. of wire rod

6.5mm

3.4mm

2.5mm

Min. dia. of wire wire

2.5mm

1mm

0.75mm

Typical configuration

LW1- 6/560

LW1-7/450

LW1-6/350

Max. average reduction

30%

20%

21%

Designed total reduction 

78-88.5%

 77.9%

78%

Max. speed of block

245 m/min

346.9 m/min

200 m/min

Total power

18.5-30kw

7.5-11kw

7.5-11kw

Weight

2000

1500

1000

Overall dimensions(LxWxH)

170x115x175cm

152x81x170cm

140x80x150cm


China Automatic Wire Nail Making Machine for Low-Medium-High Carbon Steel Wire

Fourth, nail making machine is used to make all kinds of nails. we just need to put the fine dia wire into the entrance of the nail making machine. It will make nail making fully automatically.
 

Model Z94-1C Z94-2C Z94-3C Z94-4C Z94-5.5C Z94-6.5C
Max. dia. of nail 1.6mm 2.8mm 3.5mm 4.5mm 5.5mm 6.5mm
Min. dia. of nail 0.9mm 1.2mm 1.8mm 2.8mm 3.1mm 4.5mm
Max. Length of nail 25mm 50mm 75mm 100mm 150mm 200mm
Min. length of nail 9mm 16mm 30mm 50mm 80mm 100mm
Motor power 1.5kw 2.2kw 3kw 4kw 5.5kw 11kw
Nail making speed 450pcs/min 350pcs/min 320pcs/min 260pcs/min 200pcs/min 180pcs/min
L*W*H(m) 1.5*1.3*1.2 1.7*1.3*1.4 2.0*1.4*1.4 2.2*1.6*1.65 2.5*1.6*1.5 3.5*1.9*1.8
Weight 1.2tons 1.45tons 1.8tons 2tons 2.3tons 5.5ton


China Automatic Wire Nail Making Machine for Low-Medium-High Carbon Steel Wire
China Automatic Wire Nail Making Machine for Low-Medium-High Carbon Steel Wire

 Fifth, nail polihsing machine is used to make the nail brighening and clean.
China Automatic Wire Nail Making Machine for Low-Medium-High Carbon Steel Wire
Our Certificate
ISO & CE

Our Overseas Customer
Customers from South Arica~Ethiopia~Algeria~Bennin~Zimbabwe~Nigeria~Tanzania~UAE~Egyp~Morocco~Thailand~Vietman~India-Chile~Brazil......

Why Choose Us
~ISO&CE manufacturer since 1995
~professional team & professional service 7x24hours
~strict inspection and 100% testing for machine producing
~engineers available overseas if you need any help
~refund to you if any problem caused by machine quality itself
~Customer first and good quality as our factory lifeblood
China Automatic Wire Nail Making Machine for Low-Medium-High Carbon Steel Wire
 

China Automatic Wire Nail Making Machine For low-medium-high Carbon Steel Wire 

 

My contact way

My mobile: 86-15251635399

 

Echo Shi

 

 

Nail Making Machine  Details

Nail making machine is our hot-selling machine, they are very popular among our overseas customer.

Z94C series New Generation adopts plunger type to insure High speed ,low noise, Less Impact. 

It consists of lubricating systerm and driving systerm.

The driving systerm include wire feeding,wire clamping ,wire cutting and stamping.

 

Nail Making Machine Characteristics

1) Stable Quality and Good Continuity

2) Fully Automatically and Less Impact

3) High Speed and Low Noise

4) Main components are made of high quality steel, such as shaft, cams and gear.

5) It can make the high quality of asphalt felt nails and other special nails used for high speed coil nail welder and coil nailers.


Nail Making ProcessChina Automatic Wire Nail Making Machine for Low-Medium-High Carbon Steel Wire
 

First, Shucking Machine removes surface oxide and rust from raw steel wire.

Second, Pointing Rolling machine is to make the point of the raw wire thinner, then it can enter through the wire drawing dies to draw.

Third, wire drawing machine is used to draw the raw wire to the needed dia for nails. we also make all kinds of pulley wire drawing machine.
 

Item

           Continuous Multi-block Type

Model

LW- 1-6/ 560 

LW-1-7/450

LW-1-6/350

Tensile strength of wire rod

110kg/mm2

128/mm2

140/mm2

Max. dia. of wire rod

6.5mm

3.4mm

2.5mm

Min. dia. of wire wire

2.5mm

1mm

0.75mm

Typical configuration

LW1- 6/560

LW1-7/450

LW1-6/350

Max. average reduction

30%

20%

21%

Designed total reduction 

78-88.5%

 77.9%

78%

Max. speed of block

245 m/min

346.9 m/min

200 m/min

Total power

18.5-30kw

7.5-11kw

7.5-11kw

Weight

2000

1500

1000

Overall dimensions(LxWxH)

170x115x175cm

152x81x170cm

140x80x150cm


China Automatic Wire Nail Making Machine for Low-Medium-High Carbon Steel Wire

Fourth, nail making machine is used to make all kinds of nails. we just need to put the fine dia wire into the entrance of the nail making machine. It will make nail making fully automatically.
 

Model Z94-1C Z94-2C Z94-3C Z94-4C Z94-5.5C Z94-6.5C
Max. dia. of nail 1.6mm 2.8mm 3.5mm 4.5mm 5.5mm 6.5mm
Min. dia. of nail 0.9mm 1.2mm 1.8mm 2.8mm 3.1mm 4.5mm
Max. Length of nail 25mm 50mm 75mm 100mm 150mm 200mm
Min. length of nail 9mm 16mm 30mm 50mm 80mm 100mm
Motor power 1.5kw 2.2kw 3kw 4kw 5.5kw 11kw
Nail making speed 450pcs/min 350pcs/min 320pcs/min 260pcs/min 200pcs/min 180pcs/min
L*W*H(m) 1.5*1.3*1.2 1.7*1.3*1.4 2.0*1.4*1.4 2.2*1.6*1.65 2.5*1.6*1.5 3.5*1.9*1.8
Weight 1.2tons 1.45tons 1.8tons 2tons 2.3tons 5.5ton


China Automatic Wire Nail Making Machine for Low-Medium-High Carbon Steel Wire
China Automatic Wire Nail Making Machine for Low-Medium-High Carbon Steel Wire

 Fifth, nail polihsing machine is used to make the nail brighening and clean.
China Automatic Wire Nail Making Machine for Low-Medium-High Carbon Steel Wire
Our Certificate
ISO & CE

Our Overseas Customer
Customers from South Arica~Ethiopia~Algeria~Bennin~Zimbabwe~Nigeria~Tanzania~UAE~Egyp~Morocco~Thailand~Vietman~India-Chile~Brazil......

Why Choose Us
~ISO&CE manufacturer since 1995
~professional team & professional service 7x24hours
~strict inspection and 100% testing for machine producing
~engineers available overseas if you need any help
~refund to you if any problem caused by machine quality itself
~Customer first and good quality as our factory lifeblood
China Automatic Wire Nail Making Machine for Low-Medium-High Carbon Steel Wire
 

Thermal Bag For Shipping

Thermal Bag For Shipping,Packaging Thermal Bag For Food,Cold Chain Packaging Bag,Insulated Bag With Handle

Huizhou Green Foil Insulation Co., Ltd , https://www.heatinsulator.com