Nantong Haisheng Optical Co.,LTD , https://www.haisheng-optical.com
Certificates: BV, CE, ISO, SGS
Trade Terms: FOB
Loading of Port: XINGANG PORT, China
Origin: BOTOU, HEBEI
Min. Order Qty: 1 Set/Sets
Delivery Time: 1-10 Sets, in 30 working days; Over 11 Sets, in 40 working days
Payment Term: T/T, 30% deposit in advance, 70% before shipment
Warranty: 2 Years
During the warranty period, it covers all spare parts of machines, if you find some spare parts were damaged, those new spare parts will be supplied free by us, but normal wear and tear excepted. And the freight should be bore equally by both parties.
We will provide the technical support for the whole life of the equipment.
Machinery Parameters and Others Related Parameters, as follows:
Manual Un-coiler
◊ Max Capacity: 5000kgs                                                              Â
◊ Inner diameter of coil: 400-600mm
◊ Manual with brake
Leveling Device
◊ Ensure the material level and straight
◊ The width can be adjusted
Auto Main Forming System
◊ Max Feeding width:1220 mm
◊ Product width: 1000 & 1020 mm
◊ Thickness of sheet: 0.2-1.0mm
◊ Motor Power: 5.5 kw forming system
◊ Roller material: C45 steel
◊ Diameter of shaft: Upper level 95 mm Down level 95 mm
◊ Forming station: Upper level 12 stations. Down level 12 stations.
◊ Base Frame: 360 H steel welded..
Hydraulic Cutting Device
◊ Cutting way: pause to cut.
◊ Oil pump station 1set.
◊ Hydraulic power: 4 kw hydraulic system.
◊ Blade Material: CR12 with heat treatment HRC60-62.
Electrical System
◊ Control system: HMI & PLC control panel.
◊ Power: 440V 50Hz (as per local requirement)
Run-out Table
◊ Frame: 8# steel groove welded
◊ Roller type.
◊ Quantity: 1 pc
Explanatory Note Description
Manual Un-coiler[1]: One set. The price of manual un-coiler is included in the FOB Price.
Diameter of Main Shaft: 95 mm; Rollers Station: 14 Rows [2]: The diameter of main shafts are bigger than older type, and they will be more practical, more efficient and more durable! The 14 rows of rollers station is more reasonable than older type, and make the machine has a longer service life and make the products have a more stable performance.
Machine Body: Electrostatic Spraying Treatment[3]: Their surfaces are not coated with paint. First, they will be treated by Sand Treatment Equipemnt, and then be sent to Electrostatic Spraying Treatment Room, under the high temperature (over 260º C) to finish the final spraying treatment. So, They will have a good waterproof and rust protection performance, and look more beautiful.
Hydraulic Station Structure: 300mm steel welded; Four Pole Structure[4]: The four pole structure will make the cutter has a more stable performance when cutting the panel, controlled by Hyd System, and with better accuracy. This is own special devising.
Electrical System: PLC and HMI touch Screen (Taiwan Delta)[5]: It can be modified as per customers requirements, such as Siemens, and the operation system language can be specified, such as English, French, Russian and so on.
Welcome to our company at any time!
Color Steel Wall and Roof Panel Roll Forming Machine Auto-Production
Model NO.: HKY 25-275-1100
Diameter of Main Shaft: 95 Mm
Rollers Station: 14 Rows
Roller Material: C45 Steel, Heat Treatment
Surface of Roller: Chrome Plating, Heat Treatment
Driving Mode: by Chain and Gear Box
Main Motor Power: 5.5 Kw
Machine Body: Electrostatic Spraying Treatment
Thickness of Shell Frame: 20mm; Base Frame: 350 H Steel Welded
Trademark: HKY
Transport Package: Water-Proof, Rust Prevention and Dust Prevention
Specification: HKY 25-275-1100
Origin: Botou, Hebei
               Color Steel Wall and Roof Panel Roll Forming Machine Auto-Production Line