Recently, Subaru Automobile (China) Co., Ltd. filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine, and will recall some imported Legacy and Outback series cars from November 14, 2016. According to the company's statistics, a total of 71,227 vehicles are involved in mainland China. details as follows: Spices Powder Grinding Machine
Introduction:
(1). The scope of application is wide. The whole machine is made of 304 stainless steel, which can be suitable for crushing a variety of materials. The crushing chamber is equipped with a water-cooled jacket to meet the crushing requirements of most heat-sensitive materials.
Spice Grinding Machine, Powder Grinding Machine,Spice Grinding Machines for Small,Spice Grinding Machine Henan Gems Machinery Co.,Ltd , https://www.gemsmachines.com
Part of the 2010-2013 imported Legacy series vehicles produced between May 26, 2009 and November 8, 2012, involving a total of 9448 vehicles;
Some of the 2010-2013 models of the Proud Tiger series, which were produced between July 31, 2009 and November 7, 2012, involved a total of 61,779 vehicles.
Some vehicles in this recall range are improperly manufactured due to the improper design of the front wiper motor bottom cover (with circuit inside). In some cases, repeated arc discharge may occur in the circuit contact part of the front wiper motor bottom cover to cause heat. In this case, the bottom cover of the front wiper motor may be melted. In severe cases, it may catch fire and there is a safety hazard.
Subaru Motors (China) Co., Ltd. will replace the front wiper motor bottom cover that is properly manufactured and used with anti-combustion and anti-carbonization materials to eliminate defects.
If the user finds smoke and burnt smell on the front wiper motor, stop using it immediately and seek help from the dealer immediately.
Subaru Auto (China) Co., Ltd. will notify the users within the scope of the recall by authorized dealers in the form of registered mail. Users can obtain information about the recall by logging on to the Subaru Auto (China) Co., Ltd. Chinese website: http:// or by calling Subaru Auto (China) Co., Ltd. service hotline. Users can also visit the AQSIQ website inspection and supervision department (jyjgs.aqsiq.gov.cn), the AQSIQ Defective Product Management Center website ( ) and the WeChat public account (AQSIQDPAC) to learn more. information. In addition, you can also call the Defective Product Management Center hotline or the local entry-exit inspection and quarantine agency's quality hotline: 12365 (switch No. 2), reflecting the problems in the implementation of the recall or submitting defects.
(3). Blades are installed in the crushing knife group, which increases the airflow in the crushing chamber, which can ensure the output and reduce the temperature generated during crushing. Some materials with poor fluidity and stickiness can also be crushed.
(4). Equipped with screens of various specifications to meet various fineness requirements.
(5). Easy to operate and maintain.
(6). The production capacity is strong, which can meet the output requirements of most users.
(7). There are two forms with dust removal and without dust removal, which can meet the needs of different customers.
(8). Compact structure, no dead angle, easy to clean.
· Subaru Automobile (China) Co., Ltd. recalled some imported Legacy and Outback series cars