Diesel Engine Generator Set,Diesel Genset,Googol Diesel Power Genset Bison Machinery Co., Ltd. , http://www.tzengine.com
2. ※If the motor running direction is normal, it is normal if there is gas discharge from the air outlet. (Applicable to models with three-phase voltage of 380V only).
3. When the display temperature differs from the actual temperature (measured by a standard thermometer), the parts and internal parameters of the circuit board must not be arbitrarily adjusted. The company should be notified to send staff to handle the problem.
4. Do not open the door at will when the temperature changes during use.
5. Do not place the machine in a wet place or wash it directly with water to prevent leakage.
6 prohibit alcohol, then agent. . . Etc. Flammable, volatile articles are placed on the table to prevent accidents.
7. Use flammable materials near the machine table and keep it away from accidents.
8. Please be careful to put the items into the machine, if the temperature is above 60 degrees, please wear high temperature gloves.
9. When the timer (warm to time) is working, the AL lamp lights on the temperature control meter at this time, indicating that the temperature has reached the set range and the machine starts to hold the temperature.
10. When holding temperature, when the display temperature and set temperature have overshoot or undershoot, automatic calculation is required.
11. The heater in the machine table should be checked regularly to remove dust and other miscellaneous residues.
Precautions when using aging rooms
Precautions when using the aging room 1. Check whether the voltage is correct before use. Please use the voltage marked on the table to avoid over-consumption and fire.